Table of Contents

CNC Machining MRI Patient-Positioning Fixtures: Materials, Tolerances and Artifact Risks

Magnetic resonance imaging (MRI) systems require precisely positioned patients, radiofrequency coils, sensors, and calibration accessories to support consistent imaging procedures. While the scanner controls magnetic fields and image acquisition, the mechanical fixtures surrounding the patient help establish repeatable positioning and stable equipment interfaces.

MRI patient-positioning fixtures may include custom support blocks, coil mounting brackets, alignment guides, positioning spacers, and locating components. Their mechanical structures are often relatively simple, but material selection, dimensional stability, assembly hardware, and surface conditions require careful consideration.

Discussions among MRI technologists and CNC machinists frequently raise questions about imaging artifacts caused by accessories, the safety of nonmagnetic metals, positioning difficulties, and dimensional distortion in precision-machined PEEK components.

This guide explains how CNC machining MRI patient-positioning fixtures can support precise positioning, repeatable assembly, and controlled component manufacturing. It also examines MRI material compatibility, artifact risks, GD&T, machining deformation, inspection methods, and purchasing requirements.

What Are MRI Patient-Positioning Fixtures?

Functions of MRI Positioning Fixtures

MRI patient-positioning fixtures are mechanical components designed to locate, support, or secure equipment and accessories used during magnetic resonance imaging.

Depending on the application, they may position patient supports, maintain accessory alignment, establish the location of radiofrequency coils, or support imaging calibration devices.

Unlike general-purpose mechanical brackets, components intended for MRI environments must be evaluated against magnetic field exposure, radiofrequency conditions, cleaning requirements, and potential imaging interference.

The necessary evaluation depends on where the component will be used and whether it forms part of a complete medical device or accessory assembly.

Which MRI Components Can Be CNC Machined?

CNC machining is suitable for producing many small precision components used in positioning systems, including:

  • Coil positioning brackets: Support approved mounting and alignment interfaces for MRI coils.
  • Patient support spacers: Establish controlled distances between mechanical supports and mating components.
  • PEEK locating blocks: Provide repeatable mounting positions for fixtures and accessories.
  • Alignment pins and bushings: Control relative positioning between mechanical components.
  • Calibration phantom holders: Support defined locations for imaging test objects.
  • Mounting plates: Connect positioning accessories to approved equipment interfaces.
  • Adjustment components: Support controlled positioning where the system design permits adjustment.

Although these parts may be manufactured using conventional CNC methods, the finished components cannot automatically be considered suitable for an MRI environment.

How Should Materials Be Selected for MRI Positioning Fixtures?

PEEK for Precision MRI Fixture Components

Polyether ether ketone (PEEK) is frequently considered for precision medical equipment components because of its mechanical strength, dimensional stability, chemical resistance, and electrical insulation properties.

Unfilled PEEK can be an attractive candidate for MRI positioning blocks, spacers, and mechanical support features where metal components are undesirable.

However, PEEK is available in multiple formulations, including unfilled, glass-filled, and carbon-filled grades.

These formulations differ in stiffness, thermal expansion, electrical properties, and machining behavior. Carbon-filled grades may be electrically conductive, making them unsuitable for applications that require electrically nonconductive materials.

Consequently, the material specification should identify the exact PEEK grade rather than simply stating “medical PEEK.”

Approval must consider mechanical requirements, MRI exposure, cleaning conditions, and the complete assembly design.

Can POM and Other Engineering Plastics Be Used?

Polyoxymethylene (POM), commonly known as acetal, may be considered for positioning spacers, guides, and selected locating components.

It offers good machinability, relatively low friction, and useful dimensional stability for many mechanical applications.

However, compared with PEEK, POM has different thermal and mechanical limitations.

Other engineering plastics may also be suitable depending on mechanical loading, cleaning exposure, dimensional requirements, and the specific MRI application.

Engineers should evaluate moisture absorption, creep, chemical compatibility, wear behavior, and long-term dimensional stability before approving a material.

General material properties alone cannot establish MRI suitability.

Are Titanium and Nonmagnetic Metals MRI Safe?

A frequent question in MRI discussions concerns whether titanium, aluminum, or nonmagnetic stainless steel can safely be used near a scanner.

The important distinction is that nonferromagnetic does not automatically mean MR Safe.

Even metals with weak magnetic attraction can conduct electricity, potentially interact with radiofrequency fields, or influence image quality.

Titanium and selected metal alloys may be incorporated into appropriately evaluated MR Conditional equipment, but their suitability depends on the complete component configuration and specified operating conditions.

Material substitution should never be based solely on whether a handheld magnet attracts the part.

What Is the Difference Between MR Safe, MR Conditional and MR Unsafe?

MR Safe vs. MR Conditional

MRI equipment and accessories use established safety terminology to identify their suitability for magnetic resonance environments.

MR Safe describes an item that poses no known hazards in any MR environment. Under the established classification, such items are composed of nonmetallic, electrically nonconductive, and nonmagnetic materials.

MR Conditional describes an item demonstrated to be safe only under defined conditions.

These conditions may include magnetic field strength, spatial field gradient, radiofrequency exposure, device configuration, and other operating limitations.

MR Unsafe identifies an item that poses unacceptable risks in the MR environment.

The relevant classification and labeling should follow the applicable MRI safety assessment and requirements, including ASTM F2503.

Why Material Certificates Are Not Enough

A material certificate may identify chemical composition, mechanical properties, and material grade. However, it does not establish whether an assembled fixture is suitable for MRI operation.

A PEEK bracket may contain metallic threaded inserts, springs, locking pins, adhesive materials, or other components.

Each added item can change the characteristics of the complete assembly.

Therefore, a CNC supplier can provide material certification, manufacturing records, and inspection reports, but these documents should not be represented as MRI safety approval.

The medical equipment manufacturer must determine the required testing, documentation, classification, and permitted use conditions.

How Can MRI Fixtures Affect Image Quality and Artifacts?

Can Plastic Fixtures Produce MRI Artifacts?

Technicians discussing MRI head-coil accessories have raised questions about whether plastic supports, foam pads, and positioning devices can influence image quality.

Nonmetallic materials generally present different imaging risks from ferromagnetic objects, but the absence of metal does not guarantee artifact-free imaging.

Material composition, moisture, additives, contamination, and proximity to the imaging region may influence the observed result.

For example, discussions among MRI technologists describe artifacts associated with wet padding, cleaning residue, and certain products present near the imaging region.

These observations illustrate why material composition and cleaning conditions must be considered together.

A positioning fixture should be evaluated in the intended configuration rather than assuming that every plastic component is invisible to MRI.

Magnetic Susceptibility and RF Interference

MRI image artifacts may arise from local magnetic field disturbances, radiofrequency interactions, motion, and other system-related effects.

Materials with different magnetic susceptibility from surrounding tissue or air can affect local field uniformity.

Conductive components may also interact with radiofrequency fields depending on their geometry, location, and electrical configuration.

These effects depend on the scanner, imaging sequence, and positioning of the component.

For this reason, the suitability of an MRI fixture cannot be determined solely from its dimensional accuracy or surface appearance.

When artifact testing is required, the manufacturer should define the test configuration, imaging conditions, and acceptable image-quality criteria.

How Does Fixture Positioning Influence Imaging?

Fixtures supporting radiofrequency coils or calibration targets must maintain their intended geometry during installation and use.

An incorrectly positioned support may change the location of an accessory relative to the patient or scanner reference system.

This does not necessarily produce an imaging artifact directly. However, it may affect positioning repeatability, clearance, or the equipment configuration used during imaging.

Engineers should identify the mechanical features that control accessory centerlines, orientation, and mounting location.

These requirements can then be translated into measurable dimensions and GD&T specifications.

How Should GD&T and Positioning Tolerances Be Defined?

Establish Functional Datum References

A positioning fixture commonly combines mounting faces, locating holes, guide slots, and contoured support surfaces.

The engineering drawing should establish datum references based on the actual assembly interfaces.

For example:

  • Datum A: Primary mounting surface
  • Datum B: Locating hole or reference side
  • Datum C: Secondary orientation feature

This arrangement can provide a repeatable reference system for machining, dimensional inspection, and assembly.

Position, perpendicularity, flatness, and profile tolerances may then be applied to relevant features.

The exact datum structure must reflect the intended mechanical function rather than simply following the easiest machining setup.

How Does Tolerance Stack-Up Affect Repeatability?

Individual dimensions may satisfy their drawing limits while accumulated assembly variation affects the final accessory position.

Consider an illustrative positioning system with the following lateral contributions:

  • Mounting interface variation: 0.04 mm
  • Locating pin position variation: 0.03 mm
  • Accessory mounting variation: 0.05 mm

If the errors act in the same direction, the worst-case total is 0.12 mm.

These are example values, not recommended MRI fixture tolerances.

Engineers should compare the calculated stack-up with the system’s allowable positional deviation.

Where repeatability is critical, positive locating features may be preferable to relying entirely on clearance holes and fastener tightening.

Why Are Profile Tolerances Important for Contoured Fixtures?

Some patient-positioning components contain curved support surfaces rather than simple flat geometry.

A profile tolerance can control the deviation of the manufactured surface from its defined CAD geometry.

However, a tightly controlled contour does not automatically mean that the fixture is comfortable or appropriate for every patient.

Contact pressure, support materials, allowable deflection, and clinical usability must be evaluated separately by the device manufacturer.

For manufacturing, the drawing should distinguish functional locating surfaces from patient-contact contours and noncritical cosmetic regions.

What Are the Challenges of CNC Machining PEEK MRI Fixtures?

Why Does PEEK Warp After CNC Machining?

One manufacturing forum discussion describes thin PEEK components developing warpage while attempting to meet a demanding flatness requirement.

This is an important problem because thermoplastic components can release internal stresses as material is removed.

Machining heat, asymmetric stock removal, tool pressure, and clamping conditions may contribute to dimensional changes.

A part can measure correctly while restrained in a fixture but distort after it is removed.

The problem becomes more noticeable in thin plates, deep-pocket components, and parts containing uneven wall thicknesses.

Therefore, manufacturers should evaluate dimensional stability in the specified free-state or installed-state condition.

How Can PEEK Machining Distortion Be Reduced?

A controlled machining strategy may include:

  • Selecting suitable, dimensionally stable PEEK stock
  • Using sharp cutting tools designed for engineering plastics
  • Rough machining both sides where appropriate
  • Leaving sufficient material for final finishing
  • Reducing excessive cutting heat and tool pressure
  • Using supportive fixtures without excessive clamping
  • Allowing the part to reach a stable temperature before inspection

Staged machining can help manage deformation by separating major material removal from final dimensional finishing.

Annealing or stress-relief treatment may be considered when supported by the material supplier and approved manufacturing specification.

However, heat treatment should not be introduced without evaluating its effect on dimensions, material properties, and traceability requirements.

How Are Thin Walls and Small Features Machined?

Compact MRI positioning fixtures may contain narrow slots, thin ribs, miniature holes, and small internal radii.

These features require careful tool selection and workholding.

Excessive cutting force can deflect thin walls, while aggressive finishing may change the dimensions of locating edges.

Precision CNC milling is suitable for many of these geometries, particularly when multiple surfaces must be manufactured relative to common datums.

Cylindrical spacers, bushings, and locating pins may be produced using CNC turning.

The machining process should protect functional surfaces while maintaining controlled edge conditions and consistent dimensional accuracy.

How Should Threaded Inserts and Fasteners Be Designed?

Are Metal Threaded Inserts Acceptable in MRI Fixtures?

Threaded inserts are often used to improve the durability of fastening interfaces in plastic components.

However, metallic inserts introduce additional MRI-related considerations.

Even when an insert is manufactured from a nominally nonferromagnetic alloy, it may still require evaluation for electrical conductivity, magnetic interaction, and imaging effects.

If the complete fixture is intended to satisfy an MR Safe classification, metallic inserts are inconsistent with the nonmetallic requirement of that classification.

Alternative fastening methods may include approved polymer fasteners or integrated polymer threads, depending on loading and service requirements.

The responsible manufacturer must approve the final configuration.

How Can Insert Installation Affect Dimensional Accuracy?

Installing threaded inserts into PEEK or other engineering plastics may introduce localized stress.

Excessive interference can distort the surrounding material, while insufficient engagement may reduce retention strength.

Thin mounting bosses are particularly sensitive to installation forces.

Drawings should specify the insert type, installation method, hole geometry, and acceptance requirements.

If inserts are installed after machining, inspection should confirm that critical locating features have not shifted or become distorted.

Designing for Maintenance and Repeat Assembly

Repeated removal and installation may gradually affect polymer threads, locating holes, and contact surfaces.

Appropriate fastening methods should therefore consider expected maintenance frequency, assembly torque, and wear.

Positive locating features can also help prevent installation in an incorrect orientation.

When fixtures have visually similar but functionally different versions, clear part identification and controlled revision markings can reduce assembly errors.

How Should CNC-Machined MRI Fixtures Be Inspected?

Dimensional Inspection and Functional Verification

Inspection should focus on the geometric features that establish repeatable mounting and positioning.

Critical Feature Inspection Method Functional Purpose
Mounting-face flatness CMM or flatness measurement Repeatable seating
Locating-hole position CMM or optical measurement Alignment accuracy
Guide-slot width Caliper or suitable gauge Controlled fit
Contoured support profile CMM or 3D scanning Geometric conformity
Threaded features Thread gauges and visual inspection Assembly reliability
Patient-contact edges Visual and tactile inspection Edge condition
Installed inserts Dimensional and retention checks Assembly integrity

A coordinate measuring machine can verify dimensional relationships between mounting datums, locating features, and contoured surfaces.

However, complex functional surfaces may also require a qualified profile-scanning method or an approved assembly fixture.

Why Does Inspection Temperature Matter?

Engineering plastics generally respond more strongly to temperature changes than many common structural metals.

Consequently, a precision-machined PEEK component may show dimensional differences when measured immediately after machining compared with its stabilized condition.

For tight tolerances, engineers should define appropriate inspection conditions and allow components to reach a stable temperature.

Temperature records may be useful when investigating dimensional variation between production batches.

The manufacturer’s acceptance criteria should clearly state the required measurement condition.

Can Dimensional Inspection Confirm MRI Compatibility?

No. Dimensional inspection establishes whether the part meets specified geometric requirements.

It cannot confirm magnetic force, torque, radiofrequency heating, imaging artifacts, or the complete assembly’s safety classification.

These characteristics require separate evaluation according to the device manufacturer’s MRI safety and performance requirements.

A CNC supplier may support qualification by providing material records, controlled part geometry, manufacturing documentation, and samples for testing.

How Do Cleaning, Surface Finishing and Packaging Affect MRI Fixtures?

Surface Finish and Patient-Contact Areas

Patient-facing fixture surfaces should be manufactured according to approved requirements for edge geometry, surface texture, and cleaning accessibility.

Sharp edges, exposed burrs, and rough transitions can create handling difficulties or damage adjacent padding.

Controlled edge radii and smooth transitions may improve the consistency of the mechanical interface.

However, surface roughness alone does not establish patient comfort, hygiene, or biological suitability.

These characteristics must be evaluated within the complete device design.

Preventing Cleaning Residue and Contamination

MRI accessories may undergo repeated cleaning and disinfection. Cleaning agents must be compatible with the selected materials and approved equipment configuration.

During manufacturing, machining fluids, chips, polishing compounds, and loose particles should be removed from slots, threaded holes, and recessed regions.

Forum discussions about imaging artifacts associated with wet pads and residual cleaning liquids reinforce the importance of controlled drying and material compatibility.

Cleaning procedures should therefore address both manufacturing cleanliness and the expected conditions of subsequent equipment maintenance.

Clean packaging should not be described as sterile packaging unless a validated sterilization process is included in the manufacturing scope.

Traceability and Protective Packaging

Precision positioning components should be protected from scratches, deformation, and uncontrolled contamination during transport.

Separate trays, protective sleeves, and appropriate packaging materials can help preserve critical mounting surfaces.

Each shipment should identify the part number, revision, material grade, lot information, quantity, and inspection status when required.

Where metallic inserts or purchased components are included, the traceability requirements should cover those items as well.

What Should Buyers Include in an MRI Fixture CNC Machining RFQ?

Engineering Requirements and Material Documentation

A complete request for quotation should include sufficient information for the supplier to evaluate machining feasibility and inspection requirements.

Important inputs include:

  • Released 2D drawings and 3D CAD models
  • Exact material grade and approved formulation
  • MRI-related material restrictions
  • Critical datums and GD&T requirements
  • Functional loads and allowable deflection
  • Cleaning and chemical exposure conditions
  • Specified surface finish and edge requirements
  • Threaded insert and fastener specifications
  • Prototype and repeat-production quantities
  • First-article inspection and material certification requirements
  • Packaging, identification, and traceability instructions

For assemblies involving coils, sensors, or calibration accessories, relevant mating geometry should also be supplied.

DFM Review for Prototype and Production

Design for manufacturability can identify features that introduce unnecessary machining complexity or dimensional risk.

Examples include excessive pocket depth, fragile thin walls, inaccessible internal corners, unnecessarily tight cosmetic tolerances, and difficult-to-inspect locating surfaces.

A supplier may recommend alternative machining sequences, revised tool-access geometry, or improved fixture references.

However, any proposed change affecting positioning performance, approved materials, or MRI-related requirements must receive customer approval before production.

For repeat orders, controlled revision management helps ensure that later batches remain consistent with the original approved design.

Choosing a CNC Supplier for MRI Positioning Components

Manufacturing MRI positioning fixtures requires a clear understanding of engineering plastics, precision datums, machining deformation, and assembly-related inspection.

Tuofa CNC Germany provides custom CNC machining services for precision metal and engineering plastic components, including PEEK blocks, positioning brackets, bushings, spacers, and mounting interfaces.

Early communication about component function, material restrictions, critical tolerances, and inspection expectations can help establish a suitable manufacturing process.

For medical equipment projects, the manufacturing supplier should clearly distinguish its responsibility for producing conforming components from the equipment manufacturer’s responsibility for MRI safety evaluation, device qualification, and clinical performance.

Conclusion

CNC machining MRI patient-positioning fixtures requires more than accurate dimensions and smooth surfaces. Material formulation, datum selection, dimensional stability, fastening methods, cleaning conditions, and inspection requirements must all support the intended mechanical function.

PEEK and other engineering plastics offer useful manufacturing options, but their selection does not automatically establish MRI compatibility.

By combining controlled CNC processes, functional GD&T, suitable material documentation, dimensional inspection, and clear supplier communication, manufacturers can reduce avoidable component variation and support repeatable equipment assembly.

MRI safety classification, imaging artifact performance, and complete-device validation must remain under the control of the responsible medical equipment manufacturer.

Frequently Asked Questions

Is PEEK Safe for Use in MRI Machines?

Unfilled PEEK is nonmetallic and electrically insulating, making it a potential material for MRI positioning components. However, exact material grade, additives, assembly hardware, and intended use must be evaluated. A CNC-machined PEEK component should not automatically be labeled MR Safe without an appropriate assessment.

Can CNC-Machined Plastic Parts Cause MRI Artifacts?

Yes, depending on material composition, additives, contamination, moisture, position, and imaging conditions. Nonmetallic components generally present different risks from metallic objects, but artifact-free imaging cannot be guaranteed from material selection alone. The manufacturer should evaluate the complete accessory configuration where required.

How Can Warping Be Prevented During PEEK CNC Machining?

PEEK distortion can be reduced through appropriate stock selection, staged rough machining, sharp tools, controlled cutting heat, balanced material removal, and supportive workholding. Final inspection should take place after the part reaches a stable condition. Any stress-relief treatment must follow the approved material and manufacturing requirements.

Can Metal Fasteners Be Used in MRI Positioning Fixtures?

Metal fasteners may be included in appropriately evaluated MRI equipment, but nonferromagnetic metal is not automatically MR Safe. Metallic hardware may introduce magnetic interaction, conductivity, heating, or imaging concerns. The approved material, geometry, location, and permitted MRI conditions must be established by the equipment manufacturer.

Categories
Latest Articles
CNC Quote Services
Custome parts
made easier, faster
Get a quotation
Please attach your 2D CAD drawings and 3D CAD models in any format including STEP, IGES, DWG, PDF, STL, etc. If you have multiple files, compress them into a ZIP or RAR. Alternatively, send your RFQ by email to andylu@tuofa-machining.com.

Privacy*

As with all our customers, confidentiality remains vital in demonstrating our commitment to customer service. You can feel reassured that we will gladly complete disclosure forms for your applications and your applications will solely be used for quotation purposes.