Het kiezen van het juiste constructiemateriaal vormt de basis van elk succesvol CNC-bewerkingsproject. EN 34CrNiMo6 is een warmtebehandelbaar Ni-Cr-Mo-legeringsstaal (gequenchd en getemperd) en wordt in talrijke veeleisende sectoren gebruikt omdat zijn eigenschappen perfect aansluiten bij de werkelijke bedrijfsbelastingen. In deze gids onderzoeken we de chemische samenstelling, de mechanische en fysische eigenschappen, de toepassingsgebieden in de productie en de praktische bewerkingsparameters die onze bewerkers hanteren bij het snijden, boren en afwerken van dit materiaal op moderne CNC-apparatuur. Of u nu ruw materiaal specificeert of een ontwerp valideert, de onderstaande gegevens helpen u om een weloverwogen en kosteneffectieve beslissing te nemen.
Understanding EN 34CrNiMo6 also means understanding how it behaves once it leaves the saw and enters the spindle. The sections that follow move from metallurgy and chemistry to real machining advice, so you can plan tolerances, tooling and finishing in a single pass rather than discovering problems on the shop floor. For related processing topics, see our resources on precisie CNC-bewerking and materiaalkeuze voor gedraaide onderdelen.
We have machined EN 34CrNiMo6 in quantities ranging from single prototypes to full production runs, and the guidance here reflects that hands-on experience. Numbers are representative of the common supplied temper; always confirm critical values against a mill certificate for the exact heat you receive.
Chemische samenstelling en legeringschemie
EN 34CrNiMo6 is Heat-treatable Ni-Cr-Mo alloy steel (quenched and tempered). Its performance comes from a carefully balanced chemistry in which each element plays a specific role: major alloying elements build strength and hardenability, while minor additions refine the grain, improve machinability or stabilize the microstructure during heat treatment. The typical composition is shown in the table below, and we then explain what the most important elements do.
| Element | Typische inhoud / bereik |
|---|---|
| C | 0.30-0.38% |
| Si | <0.40% |
| Mn | 0.50-0.80% |
| Ni | 1.30-1.70% |
| Cr | 1.30-1.70% |
| Mo | 0.15-0.30% |
| Fe | rest |
In EN 34CrNiMo6, C (typically 0.30-0.38%): carbon is the main hardening element, raising strength, hardness and wear resistance. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In EN 34CrNiMo6, Si (typically <0.40%): silicon improves fluidity in cast forms and, together with magnesium, can form strengthening intermetallic phases. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In EN 34CrNiMo6, Mn (typically 0.50-0.80%): manganese refines the grain, improves hot strength and helps control the as-cast or as-rolled structure. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In EN 34CrNiMo6, Ni (typically 1.30-1.70%): nickel improves high-temperature stability, hardenability and through-thickness uniformity. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In EN 34CrNiMo6, Cr (typically 1.30-1.70%): chromium boosts hardenability, temper resistance and corrosion behaviour. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In EN 34CrNiMo6, Mo (typically 0.15-0.30%): molybdenum deepens hardening, improves high-temperature strength and raises creep resistance. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In EN 34CrNiMo6, Fe (typically balance): iron is a controlled impurity that is kept low so it does not harm ductility and corrosion resistance. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In de productie wordt de samenstelling gecontroleerd door spectrometrie en gedocumenteerd op het materiaalcertificaat. Omdat kleine afwijkingen de hardbaarheid, het corrosiegedrag en de manier waarop het materiaal reageert op snijgereedschap beïnvloeden, stemmen we altijd het hittecertificaat af op het procesplan voordat de eerste staaf wordt geladen.
Mechanische eigenschappen
Mechanical properties define how EN 34CrNiMo6 carries load, resists deformation and survives fatigue in service. The values quoted here are representative of the common supplied temper; heat treatment and section size will move the numbers, so confirm with your mill certificate for critical parts. The summary table is followed by notes on why each value matters to a designer.
| Mechanical Property | Typical Value |
|---|---|
| Treksterkte | 1000-1250 MPa (QT) |
| Rekgrens | 800-1000 MPa (QT) |
| Elongation | 10-14% |
| Hardness | 300-360 HB |
De treksterkte en vloeisterkte geven aan welke belasting een onderdeel kan dragen, terwijl de rekbaarheid aangeeft hoeveel ductiliteit er nog overblijft om overbelasting te absorberen of bewerking mogelijk te maken. Hardheid is een nuttige indicator voor slijtvastheid en voor het voorspellen van gereedschapsverlies tijdens het bewerken. Samen stellen deze waarden u in staat om profielen te dimensioneren, veiligheidsfactoren te kiezen en inspectielimieten met vertrouwen vast te leggen.
For load-bearing designs, the yield strength and elongation together tell you how much margin exists before permanent set and how much ductility remains to absorb overload. EN 34CrNiMo6 offers a balance that suits structural and dynamic applications where both stiffness and toughness matter, which is why it keeps appearing in airframes, drivetrains and rotating equipment.
Fysische en thermische eigenschappen
Physical properties affect machining strategy as much as mechanical ones. Density drives mass and handling, thermal conductivity governs how heat leaves the cut, and the melting or softening point sets the ceiling for cutting speed and the type of coolant you can use. The table below summarizes the key values for EN 34CrNiMo6.
| Fysische eigenschap | Typical Value |
|---|---|
| Density | 7,85 g/cm³ |
| Smeltpunt | 1420-1480 C |
| Thermische geleidbaarheid | 37 W/m-K |
| Elektrische geleidbaarheid | 9% IACS |
These values explain why EN 34CrNiMo6 machines the way it does. Low thermal conductivity, for example, traps heat at the tool edge and pushes you toward sharper tools, lower depths of cut and aggressive coolant delivery. A low or high density changes how you fixture and balance a part. High strength-to-weight ratios, on the other hand, are exactly why designers keep specifying this material even when a cheaper alternative exists.
Belangrijkste kenmerken
EN 34CrNiMo6 earns its place in engineering designs because of a short list of characteristics that matter on the shop floor and in the field. Each one is explained below so you can judge fit against your requirement.
High strength with nickel toughness
High strength with nickel toughness In the context of EN 34CrNiMo6, this matters because it influences both the performance of the finished part and the way the raw stock must be processed, heat treated and machined to release its full potential.
Deep hardening from Ni and Mo
Deep hardening from ni and mo In the context of EN 34CrNiMo6, this matters because it influences both the performance of the finished part and the way the raw stock must be processed, heat treated and machined to release its full potential.
Good fatigue strength
Good fatigue strength In the context of EN 34CrNiMo6, this matters because it influences both the performance of the finished part and the way the raw stock must be processed, heat treated and machined to release its full potential.
Suitable for large sections
Suitable for large sections In the context of EN 34CrNiMo6, this matters because it influences both the performance of the finished part and the way the raw stock must be processed, heat treated and machined to release its full potential.
Together these traits make EN 34CrNiMo6 a practical choice where performance, weight and manufacturability must all be satisfied at once. None of them is unique on its own, but the combination is what separates a specification-grade material from a commodity one.
Industriële en technische toepassingen
The real test of any material is where it is trusted in production. EN 34CrNiMo6 appears across aerospace, automotive, energy and precision industries in the following roles, each chosen because the property profile matches the duty cycle:
Zware assen
Turbine and drivetrain shafts.
Wanneer we zware assen voor dit soort toepassingen produceren, besteden we bijzondere aandacht aan de kritische afmetingen en de oppervlaktekwaliteit, want dat bepaalt of het onderdeel zijn levensduur doorstaat. Onze inspectierapporten documenteren elk belangrijk kenmerk.
Gears
Large through-hardened gears.
When we produce gears for this kind of application, we pay particular attention to the critical dimensions and surface condition, because that is what determines whether the part survives its service life. Our inspection reports document every key feature.
Aircraft parts
High-strength structural members.
When we produce aircraft parts for this kind of application, we pay particular attention to the critical dimensions and surface condition, because that is what determines whether the part survives its service life. Our inspection reports document every key feature.
Gereedschapshouders
Stijve bevestigingen.
Wanneer we gereedschapshouders voor dit soort toepassingen produceren, besteden we bijzondere aandacht aan de kritische afmetingen en de oppervlaktekwaliteit, want dat bepaalt of het onderdeel zijn levensduur doorstaat. Onze inspectierapporten documenteren elk belangrijk kenmerk.
Voor achtergrondinformatie over hoe wij dergelijke onderdelen vasthouden en fixeren, raadpleeg onze notities over opspanningsontwerp voor CNC-frezen and tolerantiestapeling in assemblages. Goede fixatie maakt vaak het verschil tussen een onderdeel dat binnen toleranties blijft en een onderdeel dat dat niet doet.
Richtlijnen voor CNC-bewerking
Machining EN 34CrNiMo6 successfully is about matching tooling, speed and coolant to its specific behaviour. The recommendations below reflect shop-proven practice for holding dimension, surface finish and tool life, and they are a starting point that our programmers refine for each geometry.
Tooling Selection
Carbide; bewerken in gegloeide toestand.
Naast de keuze van het materiaal is ook de geometrie van het gereedschap van belang: een hoge positieve snijhoek vermindert de snijkrachten, een gepolijste groef bevordert het afvoeren van kleverige spanen, en een stijve gereedschapshouder beperkt trillingen die anders de oppervlakteafwerking zouden kunnen vernietigen. Wij kiezen de geometrie per bewerkingsstap in plaats van één universele eindfrezen te gebruiken.
Snijparameters
Turning 45-95 m/min annealed.
Deze bereikwaarden gaan uit van een stijve machine en een goed vastgeklemd werkstuk. Als er trillingen optreden, is de eerste reactie om de overhang van het gereedschap te verkorten en de spindelsnelheid te verhogen tot een stabiele werking, in plaats van simpelweg de voedingssnelheid te verlagen. Onze werkplaatsen registreren bewezen parameters per materiaal, zodat herhaalopdrachten beginnen vanuit een bekend goede basis.
Toleranties en oppervlakteafwerking
Ruwe tolerantie +/-0,05 mm vóór het warmtebehandelen; slijpen tot +/-0,01 mm.
Werkopspanning en bevestigingstechnieken
Stable workholding is the quiet hero of precision machining. For EN 34CrNiMo6 we favour full-contact soft jaws, vacuum or dedicated fixtures that constrain the part without distorting it, then measure the first piece before releasing the batch. This discipline is what lets us hold the tight tolerances the application demands.
Common challenges when cutting EN 34CrNiMo6: High alloy; machine soft, QT, then grind.. A rigid setup, sharp edges and consistent coolant delivery resolve most of them, and our quality team verifies every critical dimension before shipment so the part that reaches your dock is the part on the drawing.
Warmtebehandeling en oppervlakteafwerking
Quench and temper at 500-600 C for strength with toughness.
After thermal treatment, EN 34CrNiMo6 is usually finished by grinding, honing or light CNC cleanup to reach the final tolerance, because hardened material is too hard to cut economically. Surface treatments such as anodizing, plating, nitriding, black oxide or coating can then be added when wear, corrosion or appearance call for it. We coordinate heat treatment and finishing with machining so distortion is planned for, not discovered late.
How EN 34CrNiMo6 Compares with Similar Materials
No material is chosen in isolation. The table below positions EN 34CrNiMo6 against nearby alternatives so you can see where it wins and where a substitute might be better. The right choice is almost always a trade-off between cost, weight, strength and how easily the part can be made.
| Vergelijkbaar materiaal | Waarom het verschilt / Wanneer te kiezen |
|---|---|
| EN 30CrNiMo8 | 30CrNiMo8 is the lower-carbon, even tougher variant. |
| EN 36CrNiMo4 | 36CrNiMo4 is a similar Ni-Cr-Mo QT steel. |
Als uw prioriteit het laagst mogelijke gewicht, de hoogste sterkte of de makkelijkste bewerking is, kan de juiste buur in deze tabel de beslissing beïnvloeden. Onze ingenieurs kunnen snel een afwegingsstudie uitvoeren op basis van uw belastingen en volumes, en vaak lost een kleine wijziging in legering of warmtebehandeling een dure secundaire bewerking op.
Tuofa CNC Duitsland: Uw partner voor precisieproductie
Wanneer uw ontwerp klaar is, Tuofa CNC Duitsland turns materials like EN 34CrNiMo6 into finished, inspected components. We are a precision CNC machining supplier serving automotive, aerospace, medical and industrial customers who need consistent quality and short lead times, and we treat every order as a partnership rather than a transaction.
Waarom ingenieurs kiezen voor Tuofa CNC Duitsland
Wij combineren ISO-gecontroleerde processen, ervaren programmeurs en een transparante offerte-workflow, zodat u altijd weet wat u ontvangt voordat we de eerste spaan afsnijden. Van een enkele prototype tot volledige productie geldt hetzelfde kwaliteitssysteem, waardoor het risico wordt weggenomen dat prototype- en productieonderdelen verschillend gedragen.
Onze CNC-mogelijkheden
Our workshop runs 3-, 4- and 5-axis CNC milling centers, CNC turning lathes with live tooling, and support processes such as grinding, deburring and inspection. We routinely hold tight tolerances on metals, plastics and specialty alloys like EN 34CrNiMo6, and our CAD/CAM team optimizes toolpaths for both cycle time and surface quality.
Materialen en toleranties die wij behandelen
Beyond EN 34CrNiMo6, we machine aluminum, stainless and alloy steels, titanium, copper alloys, PEEK and other engineering polymers. Typical tolerances reach +/-0.01 mm on critical features, with full material traceability and first-article inspection on request. Get a quote through our CNC-bewerkingsdiensten pagina, of stuur ons uw tekening voor een snelle, gedetailleerde reactie.
Conclusion
EN 34CrNiMo6 is Heat-treatable Ni-Cr-Mo alloy steel (quenched and tempered), valued for its balanced combination of properties and proven track record in demanding applications. With the right composition, heat treatment and CNC parameters, it delivers reliable, repeatable parts that hold up in the field. Tuofa CNC Germany is ready to machine it to your drawing and tolerance, with the inspection and traceability your program requires. Reach out today to discuss your project and receive a fast, detailed quotation.