A driven gear is the gear that receives rotational motion and torque from a driving gear, but selecting or designing one involves much more than choosing its diameter and number of teeth. Gear ratio, module, pressure angle, backlash, contact ratio, tooth geometry, material, heat treatment, manufacturing accuracy, lubrication, and operating temperature can all influence how reliably the gear transmits power. A poor combination of these factors may increase noise, wear, pitting, heat generation, or tooth failure. This guide explains what a driven gear is, how the driving and driven gear interact, and how engineers can translate performance requirements into practical gear geometry, material choices, manufacturing processes, and a complete gear specification.
What Is a Driven Gear?
The simplest driven gear definition is a gear that receives motion and torque from another gear. The gear supplying that motion is called the driving gear, driver gear, or drive gear.
Therefore, if you want to define driven gear and driving gear by their positions in a power path:
| Gear | Funzione principale | Position in Power Flow |
|---|---|---|
| Driving Gear | Supplies rotational input to a mating gear | Input side of the gear pair |
| Driven Gear | Receives rotation and torque | Output side of the gear pair |
In a simple two-gear transmission, the driven gear commonly functions as the output gear. However, driven and driving are functional descriptions rather than permanent gear types. In a compound or multi-stage gear train, one gear may receive power from the previous stage and then drive another gear in the next stage. That gear is simultaneously driven relative to one pair and driving relative to another.
This distinction is useful when discussing a driver and driven gear because their physical construction may be similar. It is their relationship within the drivetrain—not a unique tooth shape—that determines which is the driver and which is driven.
How Does a Driven Gear Change Speed and Torque?
The relationship between the driving gear and driven gear determines how rotational speed and torque change through a gear pair. For a simple external gear set, the basic ratio can be expressed as:
Gear Ratio = Number of Teeth on Driven Gear / Number of Teeth on Driving Gear
Consider a 20-tooth driving gear meshing with a 60-tooth driven gear:
Gear Ratio = 60 / 20 = 3:1
The driven gear therefore rotates at approximately one-third of the driver’s rotational speed. In an ideal system, torque would increase by a corresponding factor of three. Real gearboxes experience friction and other mechanical losses, so actual output torque is lower than the theoretical value.
| Driver Teeth | Driven Teeth | Ratio | Output Speed | General Torque Effect |
|---|---|---|---|---|
| 20 | 60 | 3:1 | Reduced to about 1/3 | Torque increases |
| 40 | 40 | 1:1 | Approximately unchanged | Approximately unchanged except losses |
| 60 | 20 | 1:3 | Approximately tripled | Torque decreases |
This is why the drive gear and driven gear cannot be selected independently. The tooth counts determine the transmission ratio while also influencing pitch diameter, tooth geometry, center distance, contact ratio, and tooth strength.
Which Parameters Matter Most in Driven Gear Design?
A reliable driven gear begins with a consistent set of geometric parameters. Changing one parameter often affects several others, so gear design should be treated as an interconnected system rather than a list of isolated dimensions.
Gear Module
Module defines the basic size of metric gear teeth and is calculated as:
Module = Pitch Diameter / Number of Teeth
Two standard metric gears intended to mesh must use compatible tooth geometry, including the same module and pressure angle. Increasing module generally increases tooth size and provides more material at the tooth root, making larger modules useful when higher tooth loads must be carried. Smaller modules allow more teeth to fit within a limited diameter and are useful in compact mechanisms.
| Considerazione | Smaller Module | Larger Module |
|---|---|---|
| Tooth Size | Smaller | Larger |
| Gear Size for Same Tooth Count | Smaller | Larger |
| Typical Load Capability | Lower if other factors are equal | Higher if other factors are equal |
| Imballaggio | Useful for compact mechanisms | Requires more space |
Module should not be confused with gear accuracy. A smaller-module gear is not automatically more precise, and a large-module gear can still be manufactured to a high accuracy grade.
Number of Teeth and Pitch Diameter
For a standard metric spur gear, pitch diameter is directly related to module and tooth count. Increasing the number of teeth increases pitch diameter if the module remains unchanged.
Very low tooth counts need additional attention because certain combinations of tooth number and pressure angle can lead to undercut or unfavorable root geometry. The resulting tooth may have reduced bending strength or compromised meshing characteristics.
For this reason, obtaining a large ratio by making the driver extremely small is not always the best solution. Space, strength, contact conditions, and manufacturing constraints must be checked together.
Pressure Angle
The pressure angle describes the direction along which force is transmitted between mating involute gear teeth. It influences tooth-root geometry, radial separating force, bearing load, and meshing characteristics.
A 20° pressure angle is common in modern industrial gearing. Compared with smaller traditional pressure angles such as 14.5°, it generally provides a wider tooth root but also produces a different radial force component.
Pressure angle should not be selected solely based on noise. Gear noise depends on many additional factors, including tooth accuracy, contact ratio, profile modification, surface finish, alignment, shaft stiffness, bearings, and housing behavior.
Backlash
Backlash is the intentional clearance between mating tooth flanks. It is not automatically evidence of poor manufacturing.
Appropriate backlash allows room for:
- lubricant between contacting tooth surfaces;
- manufacturing variation;
- thermal expansion;
- minor assembly variation; and
- reliable rotation without binding.
Too little backlash can increase friction and operating temperature and, under severe conditions, cause interference or seizure. Excessive backlash can reduce positioning accuracy and increase impact when torque reverses direction.
There is therefore no universal backlash value for every driven gear. Module, accuracy, speed, temperature, material, lubrication method, center-distance tolerance, and application requirements all matter.
Contact Ratio
Contact ratio describes how much overlap exists between successive pairs of meshing teeth. A transverse contact ratio above 1 ensures that the next pair of teeth begins carrying load before the previous pair completely disengages.
Increasing useful contact overlap can contribute to smoother load transfer, lower tooth impact, reduced vibration, and better load sharing. However, contact ratio cannot simply be increased without considering tooth geometry, module, pressure angle, center distance, gear size, and manufacturability.
Addendum, Dedendum and Tooth Clearance
Il addendum is the part of the tooth extending outward from the pitch circle to the tooth tip. The dedendum extends inward from the pitch circle toward the tooth root.
Together they influence working depth and clearance between mating teeth. Adequate root clearance prevents the tip of one tooth from contacting an unintended region near the root of the mating tooth. Incorrect geometry can produce interference, noise, localized stress, wear, and poor power transmission.
How Do You Choose the Right Type of Driven Gear?
One of the first decisions in industrial drivetrain design is shaft orientation. After that, engineers can consider load, speed, available space, noise, efficiency, cost, and manufacturing complexity.
Ingranaggio cilindrico
Spur gears use straight teeth parallel to the axis. They are among the simplest gears to design, manufacture, inspect, and assemble.
They are commonly suitable for parallel shafts, moderate speeds, straightforward power transmission, and applications where manufacturing cost is important. Because tooth engagement occurs more abruptly than with helical gearing, spur gears may generate more vibration and noise as speed increases.
Ingranaggio elicoidale
Helical gears have teeth cut at an angle to the rotational axis. Their teeth enter contact progressively, and multiple portions of the teeth can share load during meshing.
This generally makes helical gears useful where smoother transmission, higher load capability, or lower noise is required. The trade-off is axial thrust, which must be considered when selecting bearings, shafts, and housing structures.
Double Helical Gear
Double helical gears use two opposing helix directions on the same gear. The opposing tooth directions can largely balance axial forces while maintaining the smoother engagement associated with helical teeth.
They are useful in demanding high-load applications but introduce more complex manufacturing and inspection requirements. They are therefore rarely chosen solely when a simpler spur or single-helical design can meet the requirements.
Bevel and Miter Gears
Bevel gears transmit power between intersecting shafts and are frequently used for approximately 90° changes in power-flow direction.
Miter gears are a special case of bevel gears with a 1:1 ratio. They mainly change the direction of rotation without intentionally changing speed ratio. Other bevel gear pairs can change direction, speed, and torque simultaneously.
Worm and Wheel Gear
A worm and wheel arrangement is useful when a high reduction ratio is needed in a compact space between non-parallel, non-intersecting shafts. The large amount of sliding contact makes material pairing, surface condition, heat generation, and lubrication especially important.
Some worm drives can resist back-driving, but self-locking should never be assumed for every design. Lead angle, friction conditions, lubrication, load, vibration, and material combination affect whether back-driving is possible.
Planetary Gear
A planetary arrangement normally consists of a sun gear, multiple planet gears, and an internal ring gear. Depending on which member is driven, held, or used as the output gear, the same arrangement can produce different ratios.
Planetary systems are attractive where compact packaging and high torque density are priorities because several planet gears can share transmitted load.
Internal Gear
An internal gear places the teeth on the inside of a ring rather than around its outside diameter. Internal gears are widely associated with planetary gear trains and other compact mechanisms where an external pinion must mesh inside a larger gear.
What Materials Are Used for Driven Gears?
Material selection should consider more than ultimate strength. A driven gear may require surface hardness to resist pitting and wear, core toughness to tolerate shock loading, fatigue strength for repeated cycling, dimensional stability, corrosion resistance, machinability, and an acceptable manufacturing cost.
| Materiale | Principali vantaggi | Principali limitazioni | Uso tipico |
|---|---|---|---|
| Acciaio al carbonio | Good strength, economical, widely machinable | May require heat treatment and corrosion protection | General industrial gears |
| Acciaio lega | High strength, fatigue resistance, suitable for hardening | Higher material and processing cost | High-load drivetrain gears |
| Acciaio inossidabile | Resistenza alla corrosione | Machining and hardening behavior varies by grade | Food, medical, wet, or corrosive environments |
| Ferro colato | Good damping and machinability in suitable applications | Lower toughness than many steels | Moderate-duty machinery |
| Bronzo | Good friction and wear characteristics in suitable pairings | Higher material cost than common steels | Worm wheels and sliding-contact systems |
| POM / Acetal | Low friction, dimensional stability, low noise | Lower load and temperature capability than steel | Light-duty precision mechanisms |
| Nylon | Lightweight, quiet, wear resistant in suitable conditions | Some grades absorb moisture | Consumer and light industrial gear systems |
| PEEK | Higher temperature capability and strong chemical resistance | High material cost | Specialized high-performance applications |
Plastic Driven Gear vs Metal Driven Gear
A plastic gear-driven mechanism can offer advantages where low mass, low noise, corrosion resistance, or reduced rotational inertia matter more than maximum transmitted load. Engineering polymers can also reduce friction, and some formulations incorporate lubricating fillers.
However, plastic gears require careful consideration of creep, temperature, environmental exposure, moisture absorption, and thermal expansion. Nylon is particularly important to evaluate for moisture-sensitive precision applications because changes in moisture content can alter dimensions and consequently affect backlash.
Metal gears remain preferable for many high-torque, high-temperature, shock-loaded, and high-fatigue applications.
| Requisito | Plastic Driven Gear | Metal Driven Gear |
|---|---|---|
| Peso ridotto | eccellente | Moderata |
| Low Noise | Often advantageous | Depends strongly on gear design and accuracy |
| High Torque | Limited by polymer and design | Generally preferred |
| High Temperature | Material dependent | Generalmente migliore |
| Stabilità dimensionale | Must consider temperature and moisture | Generally more stable |
| Resistenza alla corrosione | Excellent for many polymers | Depends on alloy and protection |
How Are Driven Gears Manufactured?
The manufacturing route depends on gear geometry, size, material, required quantity, accuracy, heat treatment, and cost target. A complete process may include blank preparation, machining, tooth generation, heat treatment, precision finishing, and inspection.
Gear Blank Manufacturing
Before teeth are generated, the gear blank must be produced. Forging and casting can be efficient for certain production volumes and gear sizes, while CNC turning and CNC milling are highly useful for prototypes, custom gears, and low-to-medium volume production.
CNC turning can produce critical rotational features such as:
- outside diameters;
- bores;
- hubs;
- shoulders;
- faces;
- grooves; and
- datum surfaces.
These features are particularly important because bore and datum accuracy ultimately influence how the tooth geometry runs when the finished gear rotates on its shaft.
Gear Hobbing
Hobbing is a productive generating process for many external spur and helical gears. It is often a practical choice when consistent tooth geometry and efficient batch production are required.
Gear Shaping
Gear shaping is useful for external gears and especially for geometries such as internal gears or teeth positioned near shoulders where tool access makes conventional hobbing difficult.
CNC Gear Machining
CNC machined gears are particularly useful for prototypes, custom components, low-volume projects, integrated gear-and-shaft designs, unusual materials, and parts where gear features must be produced together with precision milled or turned features.
However, standard high-volume gears do not automatically benefit from having every tooth milled individually on a general-purpose CNC machine. Dedicated hobbing, shaping, or other gear-generation processes may provide a more economical production route.
Gear Grinding and Finishing
High-accuracy gears may require tooth grinding after heat treatment. Grinding can improve tooth profile, pitch accuracy, surface condition, and consistency after distortion-producing thermal processes.
Depending on the application, honing or lapping may also be used as finishing operations. The additional process cost should be justified by functional requirements such as transmission accuracy, noise, speed, load distribution, or service life.
How Accurate Does a Driven Gear Need to Be?
Higher gear accuracy can reduce transmission error and improve load distribution, positioning, vibration, and noise performance, but the highest achievable accuracy is not automatically the correct gear specification.
Higher precision usually requires additional machine capability, controlled setups, inspection, and sometimes finishing processes such as grinding. Consequently, unnecessary accuracy increases both manufacturing cost and lead time.
General industrial machinery, robotics, aerospace systems, positioning equipment, and precision instruments can have very different accuracy requirements. The design goal should therefore be:
Specify the accuracy required by the application rather than the highest accuracy that can be manufactured.
What Heat Treatments Are Used for Driven Gears?
Carburizzazione
Carburizing is commonly used when a steel gear needs a hard, wear-resistant surface combined with a tougher core. This combination can be useful for gears exposed to high contact stress and repeated loading.
Heat-treatment distortion must be considered during process planning. Precision surfaces or tooth geometry may require machining or grinding allowance before treatment and final finishing afterward.
Nitridazione
Nitriding hardens the surface using nitrogen diffusion. Because processing temperatures are lower than in many conventional carburizing-and-quenching routes, nitriding can offer useful dimensional-control advantages for certain precision gears.
Through Hardening
Through hardening develops hardness through much of the gear section rather than creating only a hardened case. It can provide a practical combination of strength, wear resistance, process simplicity, and cost for suitable loads and gear sizes.
| Processo | Main Characteristic | Distortion Consideration | Typical Design Reason |
|---|---|---|---|
| Carburizzazione | Hard case with tougher core | Must be carefully managed | High contact load and fatigue resistance |
| Nitridazione | Hard surface produced at relatively lower temperature | Often favorable for dimensional control | Precision and wear resistance |
| Through Hardening | More uniform section hardness | Depends on material, geometry, and quenching | General strength and wear requirements |
Why Is Lubrication Important for Driven Gears?
Gear teeth experience rolling combined with varying amounts of sliding. Lubrication helps establish a protective film, reduce friction and wear, remove heat, reduce corrosion risk, and transport contaminants away from critical contact areas.
Grease Lubrication
Grease is commonly suitable for relatively low-speed enclosed mechanisms where lubricant retention and low maintenance are important.
Splash Lubrication
Many enclosed industrial gearboxes use splash lubrication. Rotation carries oil from the sump onto gears and other drivetrain components.
Forced Oil Lubrication
High-speed, heavily loaded, or thermally demanding gear systems may require pumped oil delivery to provide a controlled lubricant supply and remove heat.
The correct choice depends not only on speed and load but also on temperature, lubricant viscosity, gear geometry, materials, housing design, and duty cycle.
What Causes Driven Gear Failure?
When a driven gear fails, material selection should not automatically receive the blame. Damage patterns need to be considered alongside alignment, lubrication, bearing condition, manufacturing accuracy, housing rigidity, contamination, overload, and operating history.
| Modo di guasto | Causa tipica | Common Evidence | Possible Prevention |
|---|---|---|---|
| Abrasive Wear | Hard contaminants or dirty lubricant | Scratches and progressive material removal | Improve filtration and sealing |
| Adhesive Wear / Scuffing | Lubrication breakdown, sliding, excessive heat | Smeared or damaged tooth surfaces | Improve lubricant selection and operating conditions |
| Pitting | Repeated contact stress | Surface cavities on tooth flanks | Review stress, hardness, geometry, alignment, and lubrication |
| Bending Fatigue | Repeated tooth-root stress | Crack initiation near tooth root | Improve geometry, load control, material, and processing |
| Tooth Breakage | Overload, shock, or fatigue crack propagation | Partial or complete tooth fracture | Review design load and overload conditions |
| Deformazione plastica | Stress exceeds material capability | Permanent change in tooth shape | Increase load capacity or change material/design |
For example, pitting on a tooth flank does not by itself prove that a harder material is required. Poor alignment may concentrate the load on a small area, while insufficient lubricant film can greatly increase surface distress. Correct failure diagnosis requires identifying the mechanism before modifying the gear.
How Can You Reduce Driven Gear Noise and Vibration?
Noise should be treated as a system problem rather than simply a gear-type problem. Replacing a spur gear with a helical gear may help in some designs, but it does not correct poor alignment, excessive transmission error, bad bearings, or a flexible housing.
Improve Gear Accuracy
Pitch and profile errors can create variations in transmitted motion and dynamic tooth loading. Improving the accuracy of functionally important gear geometry may therefore reduce vibration.
Optimize Contact Ratio
Suitable tooth geometry and engagement overlap can produce smoother transitions between successive tooth pairs.
Optimize Tooth Profile
Profile modifications such as tip relief may be used in appropriate applications to compensate for deflection and reduce undesirable contact behavior. The modification amount should be calculated for the actual load and gear geometry rather than applied as a generic value.
Control Shaft and Bearing Alignment
Even a precisely manufactured driven and driver pair can perform poorly if shafts or bearings place the teeth out of alignment. This can shift contact toward one edge and create local stress, wear, heat, and noise.
Improve Housing Rigidity
The housing maintains shaft and bearing positions. If it deforms excessively under load, the effective gear alignment can change even when individual parts meet their drawing tolerances.
Control Tooth Surface Finish
Appropriate finishing of working tooth surfaces can contribute to consistent contact and reduced friction. Surface requirements should nevertheless be matched to the application rather than specified unnecessarily on every face of the gear.
How Does Temperature Affect Driven Gear Design?
Operating temperature can change gear dimensions, shaft spacing, lubricant viscosity, and backlash. As components expand, the available tooth clearance may decrease.
If thermal expansion reduces backlash too far, the sequence can become:
Reduced backlash → increased friction → additional heat → greater expansion → interference or seizure.
Designers should therefore consider operating temperature rather than only room-temperature dimensions. The analysis may include gear material, shaft material, housing material, coefficients of thermal expansion, center distance, initial backlash, and lubricant temperature capability.
Thermal effects are particularly important for plastic gears because many polymers expand substantially more with temperature than steel and may also experience additional dimensional changes from moisture or creep.
How Should You Design a Driven Gear for CNC Manufacturing?
Avoid Unnecessarily Tight Tolerances
Tight tolerances should be concentrated on dimensions that control function. Depending on the gear design, these may include the bore, locating diameter, tooth geometry, runout, critical shoulders, and mounting faces.
Applying extremely tight tolerances to non-functional dimensions increases machining and inspection costs without necessarily improving gear performance.
Control Bore-to-Tooth Concentricity
The relationship between the mounting bore and gear teeth is particularly important. Excessive radial runout can cause cyclic changes in tooth engagement as the gear rotates.
Clear datums should therefore establish how the gear will be machined and inspected. Where possible, critical rotational features should be processed using setups that preserve their geometric relationship.
Consider Heat Treatment Before Final Tolerancing
Heat treatment can alter dimensions and geometry. If a hardened gear requires tight bore, face, or tooth accuracy, the manufacturing plan should determine which features are finished before treatment and which require final grinding or machining afterward.
Design Accessible Gear Features
Custom gears may include hubs, keyways, splines, grooves, mounting holes, shoulders, and integrated shafts. These details should be checked for cutting-tool access and workholding.
Deep narrow grooves, inaccessible internal corners, abrupt shoulders close to the tooth region, and geometries that leave no reliable clamping surface can increase machining difficulty even if the features are theoretically manufacturable.
Do Not Overspecify Surface Finish
Tooth flanks, bearing seats, mounting faces, and cosmetic outer faces serve different purposes. Specifying the same very fine surface finish everywhere can create unnecessary production cost.
Surface finish should be assigned according to friction, contact, sealing, locating, fatigue, or appearance requirements for each individual surface.
What Should Be Included in a Driven Gear Specification?
A complete gear specification converts the functional requirements of the drivetrain into information a manufacturer can actually use. Simply providing the outside diameter, bore, and number of teeth is usually insufficient for a precision gear.
| Gear Specification | Perché è importante |
|---|---|
| Gear Type | Defines basic tooth and shaft arrangement |
| Module or Diametral Pitch | Defines tooth size |
| Number of Teeth | Affects ratio and gear diameter |
| Pressure Angle | Defines mating tooth geometry and force direction |
| Helix Angle | Required for helical gear geometry |
| Face Width | Influences tooth contact and load capacity |
| Bore Size and Tolerance | Controls shaft fit and rotational location |
| Backlash Requirement | Controls operating clearance |
| Gear Accuracy Grade | Defines permissible gear geometry variation |
| Materiale | Controls strength, wear, stability, and processing |
| Heat Treatment and Hardness | Controls surface and core properties |
| Runout Requirement | Controls rotational relationship between teeth and mounting features |
| Keyway or Spline | Defines torque-transfer interface to the shaft |
| Finitura superficiale | Controls condition of critical working surfaces |
| Operating Torque and Speed | Provides context for design and manufacturing review |
For helical, bevel, worm, planetary, or other specialized gears, additional parameters may be required. A manufacturer should also know the mating gear information whenever tooth contact, backlash, center distance, or final assembly performance must be verified.
A good specification is particularly valuable for custom production because it allows engineers and manufacturers to distinguish genuinely critical features from dimensions that can use standard manufacturing tolerances.
How Do You Balance Gear Life, Performance and Cost?
The best driven gear is rarely the gear with the highest hardness, tightest tolerance, largest size, finest finish, and most expensive manufacturing process. A successful design meets its required load, speed, accuracy, environment, and service life without adding features that provide no useful performance benefit.
Costs can rise because of:
- premium gear materials;
- larger gear size;
- tight tooth accuracy;
- tight bore and runout requirements;
- carburizing or nitriding;
- post-heat-treatment grinding;
- special inspection;
- complex tooth geometry; and
- low-volume custom manufacturing.
| Priorità progettuale | Possible Material Direction | Possible Manufacturing Route | Obiettivo tipico |
|---|---|---|---|
| Low Cost / Light Duty | Standard steel or suitable plastic | Basic machining, hobbing, or molding depending on volume | Meet basic load and life requirements economically |
| Balanced Industrial Performance | Suitable carbon or alloy steel | CNC blank machining plus tooth generation | Balance accuracy, durability, and cost |
| High Load / Long Life | Heat-treatable alloy steel | Tooth generation, heat treatment, and precision finishing as required | Increase fatigue and wear performance |
In industrial drivetrain design, over-engineering can be just as undesirable as under-designing. If the surrounding machine has a defined service life and moderate accuracy requirement, specifying an unnecessarily high gear grade and costly finishing process may provide little practical value.
Driven Gear Design Checklist
- Define input rotational speed.
- Define required output speed.
- Calculate the required gear ratio.
- Determine operating and peak torque.
- Identify shock loads and duty cycle.
- Determine shaft orientation.
- Select the appropriate gear type.
- Select module or diametral pitch.
- Determine tooth counts.
- Check pitch diameters and available space.
- Confirm pressure angle.
- Evaluate contact ratio.
- Define required backlash.
- Check tooth-root and contact stresses.
- Select material.
- Determine whether heat treatment is required.
- Define lubrication conditions.
- Set the required gear accuracy.
- Define bore, runout, and mounting requirements.
- Consider operating-temperature dimensional changes.
- Select the manufacturing route.
- Determine whether post-treatment grinding is required.
- Review machining access and workholding.
- Define inspection requirements.
- Complete the final gear specification before production.
Conclusione
Understanding what is a driven gear starts with recognizing its role as the gear receiving motion from a driver, but reliable gear design goes much further. Gear ratio establishes the speed and torque relationship, while module, tooth geometry, pressure angle, backlash, contact ratio, material, heat treatment, lubrication, and accuracy determine how well the gear performs in service. Manufacturing decisions must also be considered early because tooth generation, CNC machining, heat treatment, grinding, inspection, and tolerances directly affect cost. The objective is not to create the most precise or strongest gear possible, but to define a driven gear that meets the required performance and service life with an efficient, manufacturable specification.
FAQ
What is a driven gear?
A driven gear is the gear that receives rotational motion and torque from a driving or driver gear. In a simple gear pair, it usually acts as the output gear. In a multi-stage gear train, however, the same gear may be driven by one gear and drive another.
What is the difference between a driving gear and a driven gear?
The driving gear supplies rotational input, while the driven gear receives that input. The difference between the driving and driven gear is therefore based on their role in the power path rather than a unique physical gear type.
Is the driven gear always the output gear?
No. In a simple two-gear pair, the driven gear commonly serves as the output gear. In compound and multi-stage transmissions, an intermediate gear can receive motion from one stage and then become the driver for the following stage.
Does a larger driven gear increase torque?
If a larger driven gear has more teeth than the driving gear, the gear pair generally reduces rotational speed and increases available torque according to the ratio. Actual output torque will be lower than the ideal calculation because of mechanical losses.
What information is required in a gear specification?
A useful gear specification normally includes gear type, module or diametral pitch, tooth count, pressure angle, face width, bore dimensions, material, heat treatment, hardness, backlash, accuracy grade, runout, critical surface requirements, and any keyway or spline details. Operating torque, speed, temperature, and information about the mating gear can also help define appropriate manufacturing requirements.