올바른 엔지니어링 재료를 선택하는 것은 성공적인 모든 CNC 가공 프로젝트의 기초입니다. AA 2060 is Wrought, heat-treatable Al-Cu-Li-Mg thick-plate alloy, and it is specified across demanding industries because its property profile matches real service loads. In this guide we examine its chemical composition, mechanical and physical properties, where it is used in production, and the practical parameters our machinists apply when cutting, drilling and finishing it on modern CNC equipment. Whether you are specifying raw stock or validating a design, the data below will help you make a confident, cost-effective decision.
Understanding AA 2060 also means understanding how it behaves once it leaves the saw and enters the spindle. The sections that follow move from metallurgy and chemistry to real machining advice, so you can plan tolerances, tooling and finishing in a single pass rather than discovering problems on the shop floor. For related processing topics, see our resources on 정밀 CNC 가공 그리고 회전 가공 부품의 재료 선택.
We have machined AA 2060 in quantities ranging from single prototypes to full production runs, and the guidance here reflects that hands-on experience. Numbers are representative of the common supplied temper; always confirm critical values against a mill certificate for the exact heat you receive.
화학 조성 및 합금 화학
AA 2060 is Wrought, heat-treatable Al-Cu-Li-Mg thick-plate alloy. Its performance comes from a carefully balanced chemistry in which each element plays a specific role: major alloying elements build strength and hardenability, while minor additions refine the grain, improve machinability or stabilize the microstructure during heat treatment. The typical composition is shown in the table below, and we then explain what the most important elements do.
| 요소 | 전형적인 내용/범위 |
|---|---|
| Cu | 3.5-4.5% |
| Li | 0.6-1.1% |
| Mg | 0.3-0.8% |
| Ag | 0.2-0.6% |
| Zr | 0.1-0.2% |
| Al | 잔량 |
In AA 2060, Cu (typically 3.5-4.5%): copper is the primary strengthening element, enabling precipitation hardening and contributing useful electrical conductivity. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In AA 2060, Li (typically 0.6-1.1%): lithium lowers density and raises specific stiffness, producing a lighter overall structure. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In AA 2060, Mg (typically 0.3-0.8%): magnesium combines with copper or silicon to form hardening precipitates that raise strength and stabilize the structure. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In AA 2060, Ag (typically 0.2-0.6%): silver enhances the precipitation reaction and improves toughness without sacrificing strength. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In AA 2060, Zr (typically 0.1-0.2%): zirconium refines the grain and pins recrystallization, which lifts toughness and fatigue resistance. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
In AA 2060, Al (typically balance): this element is included to tune the microstructure and the final property balance. Controlling this element within tight limits is what lets mills deliver repeatable, specification-grade stock.
생산 과정에서는 성분을 분광법으로 검증하고 이를 재료 인증서에 기록합니다. 미세한 변화가 경화성, 부식 거동 및 재료의 절삭 공구에 대한 반응에 영향을 미치므로, 최초의 봉재를 장입하기 전에 반드시 열처리 인증서와 공정 계획을 일치시킵니다.
기계적 성질
Mechanical properties define how AA 2060 carries load, resists deformation and survives fatigue in service. The values quoted here are representative of the common supplied temper; heat treatment and section size will move the numbers, so confirm with your mill certificate for critical parts. The summary table is followed by notes on why each value matters to a designer.
| 기계적 성질 | 일반적 값 |
|---|---|
| 인장강도 | 450-510 MPa (T8x) |
| 항복강도 | 390-450 MPa (T8x) |
| 연신율 | 6-10% |
| 경도 | 135-150 HB |
인장강도와 항복강도는 해당 부재가 견딜 수 있는 하중을 알려주며, 연신율은 과부하를 흡수하거나 성형 작업을 수용할 수 있는 소성 변형 능력이 어느 정도 남아 있는지를 나타냅니다. 경도는 내마모성을 평가하고 가공 시 공구 마모를 예측하는 데 유용한 지표입니다. 이들 수치를 종합하면 단면 치수를 결정하고 안전율을 선택하며 검사 기준을 신뢰성 있게 설정할 수 있습니다.
For load-bearing designs, the yield strength and elongation together tell you how much margin exists before permanent set and how much ductility remains to absorb overload. AA 2060 offers a balance that suits structural and dynamic applications where both stiffness and toughness matter, which is why it keeps appearing in airframes, drivetrains and rotating equipment.
물리적 및 열적 특성
Physical properties affect machining strategy as much as mechanical ones. Density drives mass and handling, thermal conductivity governs how heat leaves the cut, and the melting or softening point sets the ceiling for cutting speed and the type of coolant you can use. The table below summarizes the key values for AA 2060.
| 물리적 특성 | 일반적 값 |
|---|---|
| 밀도 | 2.68 g/cm3 |
| 녹는점 | 500-640 ℃ |
| 열전도율 | 120 W/m·K |
| 전기전도율 | 34% IACS |
These values explain why AA 2060 machines the way it does. Low thermal conductivity, for example, traps heat at the tool edge and pushes you toward sharper tools, lower depths of cut and aggressive coolant delivery. A low or high density changes how you fixture and balance a part. High strength-to-weight ratios, on the other hand, are exactly why designers keep specifying this material even when a cheaper alternative exists.
주요 특성
AA 2060 earns its place in engineering designs because of a short list of characteristics that matter on the shop floor and in the field. Each one is explained below so you can judge fit against your requirement.
Low density for thick monolithic parts
Low density for thick monolithic parts In the context of AA 2060, this matters because it influences both the performance of the finished part and the way the raw stock must be processed, heat treated and machined to release its full potential.
High strength through plate thickness
High strength through plate thickness In the context of AA 2060, this matters because it influences both the performance of the finished part and the way the raw stock must be processed, heat treated and machined to release its full potential.
Good toughness and fatigue
Good toughness and fatigue In the context of AA 2060, this matters because it influences both the performance of the finished part and the way the raw stock must be processed, heat treated and machined to release its full potential.
Reduces part count vs built-up assemblies
Reduces part count vs built-up assemblies In the context of AA 2060, this matters because it influences both the performance of the finished part and the way the raw stock must be processed, heat treated and machined to release its full potential.
Together these traits make AA 2060 a practical choice where performance, weight and manufacturability must all be satisfied at once. None of them is unique on its own, but the combination is what separates a specification-grade material from a commodity one.
산업 및 엔지니어링 응용 분야
The real test of any material is where it is trusted in production. AA 2060 appears across aerospace, automotive, energy and precision industries in the following roles, each chosen because the property profile matches the duty cycle:
Wing ribs and spars
Large machined monolithic details.
When we produce wing ribs and spars for this kind of application, we pay particular attention to the critical dimensions and surface condition, because that is what determines whether the part survives its service life. Our inspection reports document every key feature.
Fuselage frames
Thick machined frame segments.
When we produce fuselage frames for this kind of application, we pay particular attention to the critical dimensions and surface condition, because that is what determines whether the part survives its service life. Our inspection reports document every key feature.
우주 구조물
Mass-critical launch hardware.
이러한 용도에 맞춰 우주 구조물을 제작할 때에도 중요한 치수와 표면 상태에 특히 주의를 기울입니다. 이는 부품이 설계된 내구수명을 유지할 수 있는지를 결정하는 핵심 요소이기 때문입니다. 당사의 검사 보고서에는 모든 주요 특징이 상세히 기록됩니다.
방위 산업용 기체 프레임
Rotorcraft and UAV structure.
이러한 용도에 맞춰 방위용 기체 프레임을 제작할 때에도 중요한 치수와 표면 상태에 각별히 주의를 기울입니다. 이는 부품이 설계된 내구수명을 유지할 수 있는지를 결정하는 핵심 요소이기 때문입니다. 당사의 검사 보고서에는 모든 주요 특징이 상세히 기록됩니다.
이러한 부품들을 고정하고 가공하는 방법에 대한 배경 정보는 당사의 관련 노트를 참고하시기 바랍니다. CNC 밀링을 위한 지그 설계 그리고 조립 시 공차 중첩. 적절한 지그 및 고정 장치는 허용 오차를 준수하는 부품과 그렇지 못한 부품을 가르는 중요한 요소가 될 수 있습니다.
CNC 가공 지침
Machining AA 2060 successfully is about matching tooling, speed and coolant to its specific behaviour. The recommendations below reflect shop-proven practice for holding dimension, surface finish and tool life, and they are a starting point that our programmers refine for each geometry.
금형 선택
미세결정질 초경합금, 연마 처리; 마무리 가공에는 PCD 공구를 사용합니다.
재료 등급 외에도 공구 형상 역시 중요합니다. 높은 양의 리브 각도는 절삭력을 감소시키고, 연마된 플루트는 점착성 칩을 원활히 배출하도록 도와주며, 강성 높은 공구 홀더는 표면 마감을 저해하는 진동을 효과적으로 억제합니다. 당사는 하나의 범용 엔드밀을 사용하기보다는 각 가공 작업에 맞는 적절한 형상을 선정합니다.
절삭 파라미터
거친 가공 시 절삭 속도는 130~210 m/min, 마무리 가공 시에는 300~450 m/min으로 설정합니다.
이러한 공정 범위는 단단한 기계와 잘 고정된 가공물을 전제로 합니다. 만약 진동이 발생한다면, 단순히 이송 속도를 낮추기보다는 먼저 공구 돌출부를 짧게 하고 스핀들 회전수를 높여 안정적인 진동 영역으로 조정하는 것이 우선입니다. 당사의 작업장에서는 재료별로 검증된 공정 파라미터를 기록하므로, 반복 가공 시에도 이미 검증된 최적 조건에서 시작할 수 있습니다.
공차 및 표면 마감
Stress-relieved plate holds +/-0.02 mm.
작업 고정 및 지그 설계
Stable workholding is the quiet hero of precision machining. For AA 2060 we favour full-contact soft jaws, vacuum or dedicated fixtures that constrain the part without distorting it, then measure the first piece before releasing the batch. This discipline is what lets us hold the tight tolerances the application demands.
Common challenges when cutting AA 2060: Heavy roughing of thick plate; rigid fixturing and high-power spindle.. A rigid setup, sharp edges and consistent coolant delivery resolve most of them, and our quality team verifies every critical dimension before shipment so the part that reaches your dock is the part on the drawing.
열처리와 표면 마감
강도와 인성을 확보하기 위해 T8x 열처리를 적용하고, 이후 연신 및 잉여 두께를 남겨 최종 성능을 확보합니다.
After thermal treatment, AA 2060 is usually finished by grinding, honing or light CNC cleanup to reach the final tolerance, because hardened material is too hard to cut economically. Surface treatments such as anodizing, plating, nitriding, black oxide or coating can then be added when wear, corrosion or appearance call for it. We coordinate heat treatment and finishing with machining so distortion is planned for, not discovered late.
How AA 2060 Compares with Similar Materials
No material is chosen in isolation. The table below positions AA 2060 against nearby alternatives so you can see where it wins and where a substitute might be better. The right choice is almost always a trade-off between cost, weight, strength and how easily the part can be made.
| 비교 가능한 재료 | 왜 다른지 / 언제 선택해야 하는지 |
|---|---|
| AA 2050 | 2050 is the related plate grade; 2060 tuned for very thick sections. |
| AA 7050 | 7050 is the Zn-based alternative with similar thick-section performance. |
최소 중량, 최고 강도, 혹은 가장 쉬운 가공을 우선시한다면, 이 표에서 가장 적합한 대체재가 결정을 좌우할 수 있습니다. 당사 엔지니어들은 귀사의 하중과 부피를 기반으로 신속한 비교 분석을 수행하며, 합금이나 열처리 상태를 조금만 변경해도 비용이 많이 드는 2차 가공 공정을 제거할 수 있는 경우도 종종 있습니다.
Tuofa CNC Germany: 당신의정밀제조파트너
설계가 완성되었을 때, Tuofa CNC 독일 turns materials like AA 2060 into finished, inspected components. We are a precision CNC machining supplier serving automotive, aerospace, medical and industrial customers who need consistent quality and short lead times, and we treat every order as a partnership rather than a transaction.
엔지니어들이 Tuofa CNC Germany를선택하는이유
ISO 기준에 맞춘 공정, 풍부한 경험을 갖춘 프로그래머, 그리고 투명한 견적 워크플로를 결합하여, 첫 번째 칩을 절삭하기 전부터 고객이 받게 될 결과물을 명확히 파악할 수 있도록 합니다. 단일 프로토타입부터 대량 생산까지 동일한 품질 시스템이 적용되므로, 프로토타입과 양산품 간 성능 차이가 발생할 위험을 원천적으로 제거합니다.
당사 CNC 가공 역량
Our workshop runs 3-, 4- and 5-axis CNC milling centers, CNC turning lathes with live tooling, and support processes such as grinding, deburring and inspection. We routinely hold tight tolerances on metals, plastics and specialty alloys like AA 2060, and our CAD/CAM team optimizes toolpaths for both cycle time and surface quality.
당사에서 취급하는 재료 및 공차
Beyond AA 2060, we machine aluminum, stainless and alloy steels, titanium, copper alloys, PEEK and other engineering polymers. Typical tolerances reach +/-0.01 mm on critical features, with full material traceability and first-article inspection on request. Get a quote through our CNC 가공 서비스 페이지를 통해 견적을 받으시거나, 도면을 보내주시면 신속하고 상세한 답변을 드립니다.
결론
AA 2060 is Wrought, heat-treatable Al-Cu-Li-Mg thick-plate alloy, valued for its balanced combination of properties and proven track record in demanding applications. With the right composition, heat treatment and CNC parameters, it delivers reliable, repeatable parts that hold up in the field. Tuofa CNC Germany is ready to machine it to your drawing and tolerance, with the inspection and traceability your program requires. Reach out today to discuss your project and receive a fast, detailed quotation.