블로그

EN 39NiCrMo3 is a heat-treatable Ni-Cr-Mo steel for high-strength engineering components. Discover its composition, properties, applications, and CNC machining guidance.

EN 40CrMnMo7 (P20-type) is a pre-hardened plastic mold steel. This article details its composition, properties, applications, and CNC machining tips.

EN 40CrMnMoS8-6 is a free-machining P20-type plastic mold steel. Explore its properties, applications, and CNC machining recommendations.

EN 41Cr4 is a heat-treatable chromium steel for quenched and tempered parts. Learn its composition, properties, applications, and CNC machining guidance.

EN 42CrMo4 is a widely used heat-treatable chromium-molybdenum steel. This guide covers its chemistry, properties, applications, and machining setups.

EN 42CrMoS4 is a free-machining version of 42CrMo4 for high-volume turned parts. Discover its composition, properties, applications, and machining guidance.

EN 46Cr2 is a low-alloy chromium steel for surface-hardened parts. This article details its composition, properties, uses, and CNC machining tips.

EN 50CrV4 is a chromium-vanadium spring steel for high-fatigue components. Explore its properties, applications, and CNC machining recommendations.

PEBA, marketed as Pebax, is a thermoplastic elastomer with a unique soft-yet-strong profile. This guide covers its composition, properties, applications, and CNC machining practices.

PEEK 1000 is the unfilled natural grade of polyether ether ketone, a high-performance engineering plastic. Learn its properties, applications, and CNC machining guidance.

PEEK 150G is a glass-fiber-reinforced PEEK grade offering higher stiffness at lower cost. Discover its composition, properties, applications, and machining tips.

PEEK CA30 is a 30% carbon-fiber-reinforced PEEK with superior wear and ESD properties. This guide covers its composition, properties, applications, and machining.